The Calsense POC decoder, model CS-2W-POC operates a single master valve and Calsense Flow Meter (model FM). A single controller can operate up to six POC decoders with a maximum of 12‐POCs in a chain of controllers using FLOWSENSE™ technology. It is intended that all wire runs between valves and 2‐Wire decoders be direct pulls and have no splices except at the decoder location.

POC 2-Wire Decoder Specifications

Dimensions

  • Height: 1.4”
  • Width: 3.3”
  • Length: 4.0”

Environmental

  • Operating Temperature: -12° to 65°C (10° to 150°F)

Electrical Output

  • Max Voltage: 24-VAC

2-Wire Cable

  • 14-gauge (1.5 mm) solid copper, jacketed
  • Paige® P7354D or Regency’s Hunter® Decoder Cable

Wire Splices

  • 3M™ Scotchcast™ Connector Sealing Pack 3570G-N

Max Distance from Decoder to Solenoids

  • 100 ft., 14-gauge wire to Master Valve
  • 20 ft., 14-gauge wire to Flow Meter

Transient Protection

  • Ground wire included with each decoder
  • Ground rods to be installed at:
    • The controller
    • The decoder closest to every 300-ft. of wire run, and
    • The last decoder of each wire run

Warranty

  • 3-year limited warranty

3M and Scotchcast are trademarks of 3M Company.
Hunter is a registered trademark of Hunter Industries, Inc.
Paige is a registered trademark of Paige Electric, LLP.